Technology introduction:

Nitronic 60 is a high-performance stainless steel with excellent corrosion resistance and wear resistance and has a wide range of applications. Mainly used in power, chemical, petrochemical, food and oil and gas industries. Among them, it has been widely used in expansion joint wear plates, wear-resistant pump rings, bushings, process valve stems, seals and logging equipment. Especially in some fields that require high wear resistance and corrosion resistance, such as the chemical and petrochemical industries.

Nitronic 60 shows excellent performance. The tensile strength of Nitronic 60 is very high. The tensile strength in the solid solution state reaches 690N/mm2, the yield strength is 380N/mm2, and the elongation is 35%. At room temperature, Nitronic 60 has nearly twice the yield strength of 304 and 316, giving it excellent durability and strength in high-stress environments. In addition, Nitronic 60 has excellent high-temperature oxidation resistance and low-temperature impact resistance. It can work in high-temperature environments for a long time without losing performance. It also has good low-temperature resistance and is not prone to embrittlement.

As a high-performance stainless steel, Nitronic 60 has shown excellent performance in various fields. Its high tensile strength and corrosion resistance make it the material of choice for many industries, and its high-temperature oxidation resistance and low-temperature impact resistance also provide possibilities for applications in some special fields.

1. Can be customized according to the customer's drawing requirements;

2. Linear tolerance: ±0.01mm; Angle accuracy: ± 1/2 °; Surface gloss: Ra1.6-3.2;

3. Wide range of applications. Suitable for various industries that require wear resistance, corrosion resistance and heat resistance;

Nitronic60 chemical composition:

Ni：8%-9%；Cr：16.0%-18.0%；Fe：59%-66%；C：≤0.1%；Mn：7.0%-9.0%；Si：3.5%-4.5%；N：0.08%-0.18%；P：≤0.04%；S：≤0.03%